Register
Home Quizzes Quiz Detail
Practice Quiz

ACCA Residential HVAC Design Practice Questions - ACCA Residential HVAC Design for Quality Installation Certificate Exam

100 questions 5.0 rating Mobile friendly
$69.00

Unlock the full practice quiz

Get complete access to the questions, explanations and printable quiz resources.

Full access: unlock all quiz questions and explanations.
Printable review: access the full quiz PDF with correct answers after purchase.

About this Exam

Prepare with the ACCA Residential HVAC Design Practice Questions - ACCA Residential HVAC Design for Quality Installation Certificate Exam practice quiz. This question bank includes 100 questions covering manual, cooling, load, heating, and design. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

Sample Questions

Question 1
Per ACCA Manual J 8th Edition, which load calculation should be used to select cooling and heating equipment for a typical single-family home with one central system?
The block (whole-house) load
The largest single room load
The sum of all peak room loads regardless of timing
The connected appliance nameplate load
Question 2
Manual J specifies default indoor design conditions for cooling. What indoor dry-bulb temperature and relative humidity does Manual J use as the standard cooling design point?
70 degrees F and 30% RH
75 degrees F and 50% RH
72 degrees F and 60% RH
78 degrees F and 55% RH
Question 3
When selecting outdoor design conditions in Manual J, the cooling outdoor dry-bulb is typically taken at which ASHRAE annual percentile?
0.4% cooling design dry-bulb
5% cooling design dry-bulb
1% cooling design dry-bulb
10% cooling design dry-bulb
Question 4
A heating design temperature difference (Delta T) is needed for a Manual J calculation. If the indoor heating design is 70 degrees F and the outdoor 99% heating design dry-bulb is 5 degrees F, what is the heating Delta T?
60 degrees F
70 degrees F
75 degrees F
65 degrees F
Question 5
In Manual J, the heat transfer multiplier (HTM) for an opaque surface such as a wall is best described as:
The U-value multiplied by the design temperature difference
The R-value divided by surface area
The CFM of infiltration times 1.1
The latent load per square foot of glazing

Ready to test your knowledge?

Buy Now to Access

Additional Information

ACCA Residential HVAC Design Practice Questions - ACCA Residential HVAC Design for Quality Installation Certificate Exam

This practice set contains 100 questions from the matching question bank and focuses on manual, cooling, load, heating, and design. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Related Quizzes

120-Hour TESOL Certificate Practice Test
76 Qs  |  0 Min
340B Program Operations Certificate Practice Exam
60 Qs  |  0 Min
Architectural Design Practice Test: Your Comprehensive Study Guide
10 Qs  |  0 Min
Arizona CR-39 HVAC Contractor Practice Exam
40 Qs  |  0 Min
Certified Supplier Quality Professional (CSQP) Practice Exam
265 Qs  |  0 Min

Frequently Asked Questions

This quiz contains a total of 100 practice questions carefully selected to test your knowledge on this subject.
Yes, you will have exactly 0 minutes to complete the exam. A countdown timer will be visible once you start.
Yes, you can retake this practice test as many times as you need. The questions and options may be randomized on subsequent attempts to ensure comprehensive learning.

Reviews

5.0

Based on 0 reviews

Leave a Review

No reviews yet. Be the first to review!