Register
Home Quizzes Quiz Detail
Practice Quiz

Basque PAU Technology & Eng II Practice Questions - Basque Country PAU Technology & Engineering II Examination - UPV EHU (2o Bachillerato 2026) Exam

100 questions 5.0 rating Mobile friendly
$69.00

Unlock the full practice quiz

Get complete access to the questions, explanations and printable quiz resources.

Full access: unlock all quiz questions and explanations.
Printable review: access the full quiz PDF with correct answers after purchase.

About this Exam

Prepare with the Basque PAU Technology & Eng II Practice Questions - Basque Country PAU Technology & Engineering II Examination - UPV EHU (2o Bachillerato 2026) Exam practice quiz. This question bank includes 100 questions covering control, logic, valve, input, and pneumatic. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

Sample Questions

Question 1
A cylindrical steel specimen with a diameter of 10.0 mm (cross-sectional area A = 78.54 mm²) is subjected to a uniaxial tensile load of 31,416 N. What is the engineering tensile stress σ induced in the specimen?
800 MPa
200 MPa
400 MPa
100 MPa
Question 2
A copper rod with initial length L₀ = 2.0 m and cross-sectional area A = 50.0 mm² is pulled in tension by a 6,000 N force. Given Young's modulus E = 120 GPa for copper, what is the elastic elongation ΔL of the rod?
1.0 mm
4.0 mm
0.5 mm
2.0 mm
Question 3
In a standard tensile test curve of engineering stress versus engineering strain, what property corresponds to the maximum stress point prior to localized necking?
Ultimate tensile strength (UTS)
Yield strength (0.2% offset)
Proportional limit
Fracture stress
Question 4
A Brinell hardness test is conducted using a 10 mm diameter hardened steel ball indenter under a load of 3,000 kgf. If the resulting indentation diameter d is measured as 4.0 mm, what is the approximate Brinell Hardness Number (HB)?
310 HB
229 HB
450 HB
150 HB
Question 5
Which hardness test uses a square-based diamond pyramid indenter with an apex angle of 136° between opposite faces, applicable across soft and hard metals?
Shore scleroscope test
Brinell hardness test (HB)
Vickers hardness test (HV)
Rockwell B test (HRB)

Ready to test your knowledge?

Buy Now to Access

Additional Information

Basque PAU Technology & Eng II Practice Questions - Basque Country PAU Technology & Engineering II Examination - UPV EHU (2o Bachillerato 2026) Exam

This practice set contains 100 questions from the matching question bank and focuses on control, logic, valve, input, and pneumatic. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Related Quizzes

2nd Class Power Engineering (2A1) Practice Exam
100 Qs  |  0 Min
2nd Class Power Engineering 2A3 Practice Exam
10 Qs  |  0 Min
2nd Class Power Engineering (2B1) Practice Exam
200 Qs  |  0 Min
2nd Class Power Engineering 2B2 Practice Exam
10 Qs  |  0 Min
2nd Class Power Engineering 2B3 Practice Exam
10 Qs  |  0 Min

Frequently Asked Questions

This quiz contains a total of 100 practice questions carefully selected to test your knowledge on this subject.
Yes, you will have exactly 0 minutes to complete the exam. A countdown timer will be visible once you start.
Yes, you can retake this practice test as many times as you need. The questions and options may be randomized on subsequent attempts to ensure comprehensive learning.

Reviews

5.0

Based on 0 reviews

Leave a Review

No reviews yet. Be the first to review!