Register
Home Quizzes Quiz Detail
Practice Quiz

Cameroon Baccalauréat Série F4 Practice Questions - Cameroon Baccalauréat Technique Série F4 (Génie Civil) Exam

100 questions 5.0 rating Mobile friendly
$69.00

Unlock the full practice quiz

Get complete access to the questions, explanations and printable quiz resources.

Full access: unlock all quiz questions and explanations.
Printable review: access the full quiz PDF with correct answers after purchase.

About this Exam

Prepare with the Cameroon Baccalauréat Série F4 Practice Questions - Cameroon Baccalauréat Technique Série F4 (Génie Civil) Exam practice quiz. This question bank includes 100 questions covering text, concrete, reinforced, beam, and load. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

Sample Questions

Question 1
In limit state design according to French/Cameroonian reinforced concrete standard BAEL 91 (Béton Armé aux États Limites), what is the combination of actions at the Ultimate Limit State (ELU - État Limite Ultime) under fundamental combinations for permanent loads ($G$) and variable loads ($Q$)?
1.35 G + 1.5 Q
G + Q
1.5 G + 1.35 Q
1.0 G + 1.0 Q
Question 2
At the Serviceability Limit State (ELS - État Limite de Service), what combination of permanent dead load ($G$) and live load ($Q$) is used for cracking and deflection checks under BAEL 91?
G + Q (rare combination / combinaison rare)
1.35 G + 1.5 Q
0.85 G + 1.0 Q
1.5 G + 0.9 Q
Question 3
What is the design compressive strength of concrete $f_{bu}$ at the Ultimate Limit State (ELU) under BAEL 91 for characteristic 28-day cylinder compressive strength $f_{c28} = 25\text{ MPa}$ under persistent actions (safety factor $\gamma_b = 1.5$ and coefficient $\theta = 1.0$)?
14.17 MPa (f_bu = 0.85 · f_c28 / (θ · γ_b))
16.67 MPa
25.00 MPa
18.75 MPa
Question 4
For FeE500 high-yield reinforcing steel ($f_e = 500\text{ MPa}$), what is the design tensile yield strength $f_{su}$ at the Ultimate Limit State under persistent actions (steel safety factor $\gamma_s = 1.15$)?
434.8 MPa (~435 MPa, f_su = f_e / γ_s)
500.0 MPa
370.4 MPa
575.0 MPa
Question 5
In a simply supported rectangular reinforced concrete beam subjected to a positive bending moment ($M_u > 0$), where are the primary longitudinal tensile steel reinforcement bars placed?
At the bottom of the beam cross-section (soffit / zone tendue inférieure)
At the top of the beam cross-section
Exactly along the neutral axis at mid-depth
Exclusively inside the vertical stirrup hooks

Ready to test your knowledge?

Buy Now to Access

Additional Information

Cameroon Baccalauréat Série F4 Practice Questions - Cameroon Baccalauréat Technique Série F4 (Génie Civil) Exam

This practice set contains 100 questions from the matching question bank and focuses on text, concrete, reinforced, beam, and load. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Related Quizzes

Civil Air Patrol Practice Exam
225 Qs  |  0 Min
Civil Air Patrol Staff Sergeant Leadership Practice Test
10 Qs  |  0 Min
Civil Engineer Licensure Practice Exam
261 Qs  |  0 Min
Civil Engineering Professional Engineer Practice Exam
255 Qs  |  0 Min
Civil Procedure Multistate Bar Practice Exam
216 Qs  |  0 Min

Frequently Asked Questions

This quiz contains a total of 100 practice questions carefully selected to test your knowledge on this subject.
Yes, you will have exactly 0 minutes to complete the exam. A countdown timer will be visible once you start.
Yes, you can retake this practice test as many times as you need. The questions and options may be randomized on subsequent attempts to ensure comprehensive learning.

Reviews

5.0

Based on 0 reviews

Leave a Review

No reviews yet. Be the first to review!