Register
Home Quizzes Quiz Detail
Practice Quiz

CIT Practice Questions - Certified Irrigation Technician Exam

100 questions 5.0 rating Mobile friendly
$69.00

Unlock the full practice quiz

Get complete access to the questions, explanations and printable quiz resources.

Full access: unlock all quiz questions and explanations.
Printable review: access the full quiz PDF with correct answers after purchase.

About this Exam

Prepare with the CIT Practice Questions - Certified Irrigation Technician Exam practice quiz. This question bank includes 100 questions covering irrigation, water, sprinkler, pipe, and pressure. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

Sample Questions

Question 1
What does the abbreviation 'GPM' represent on an irrigation system flow specification?
Grains per minute
Gallons per minute
Gauge pressure measurement
Ground pressure modulus
Question 2
What is the typical recommended maximum velocity for water flowing inside a PVC mainline to limit water hammer and erosion of the pipe?
1 ft/s
5 ft/s
15 ft/s
25 ft/s
Question 3
Static water pressure refers to the pressure in an irrigation system measured when:
Water is flowing through the system at full design flow
No water is flowing — all valves are closed
Only the smallest emitter is operating
The pump is shut off and the supply line is drained
Question 4
Approximately how much pressure (in psi) does a 10-foot vertical column of water exert at its base?
0.43 psi
2.31 psi
4.33 psi
10.0 psi
Question 5
When an irrigation lateral runs uphill, what happens to the pressure available at the highest sprinkler relative to the source?
It increases by 0.433 psi per foot of rise
It decreases by 0.433 psi per foot of rise
It is unaffected because pressure is independent of elevation
It decreases by 1 psi per foot of rise

Ready to test your knowledge?

Buy Now to Access

Additional Information

CIT Practice Questions - Certified Irrigation Technician Exam

This practice set contains 100 questions from the matching question bank and focuses on irrigation, water, sprinkler, pipe, and pressure. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Related Quizzes

ISC2 Certified in Cybersecurity Practice Exam
176 Qs  |  0 Min
310T Truck and Coach Technician Exam
135 Qs  |  0 Min
Arizona CNA Certified Nursing Assistant Practice Exam
40 Qs  |  0 Min
Certified Professional Public Buyer (CPPB) Practice Exam
29 Qs  |  0 Min
A&P Mechanic Technician Practice Test
267 Qs  |  0 Min

Frequently Asked Questions

This quiz contains a total of 100 practice questions carefully selected to test your knowledge on this subject.
Yes, you will have exactly 0 minutes to complete the exam. A countdown timer will be visible once you start.
Yes, you can retake this practice test as many times as you need. The questions and options may be randomized on subsequent attempts to ensure comprehensive learning.

Reviews

5.0

Based on 0 reviews

Leave a Review

No reviews yet. Be the first to review!