AUTODESK INVENTOR
CERTIFIED PROFESSIONAL
MECHANICAL DESIGN
PRACTICE EXAM 60
QUESTIONS
Question 1: A model state should omit a feature only in one member while keeping the feature available in the factory. What is the appropriate member-speci�c action?
Choices:
1) Delete the feature from the browser 2) Suppress the feature for that member 3) Break the project �le 4) Convert the feature to a drawing annotation
Correct Answer: Suppress the feature for that member
Explanation: In a Model State work�ow, suppression is used to remove a feature from participation in a speci�c member. Deleting is a global operation and would remove the feature from the model rather than just one member.Page 1
Question 2: A vendor supplies a 2D DXF pro�le that should become the basis for a new Inventor feature. What is the most appropriate use of that �le?
Choices:
1) Use it as a physical material library 2) Open it as a positional representation 3) Use it to de�ne assembly mass properties 4) Import the 2D geometry into a sketch and constrain it as needed
Correct Answer: Import the 2D geometry into a sketch and constrain it as needed
Explanation: A 2D DXF is well suited for transferring planar pro�le geometry into an Inventor sketch. The imported geometry can then be constrained and used to create parametric features.
Question 3: A designer needs a duplicated set of assembly components that will
become a new variant with separate component �les. Which command is intended for this purpose?
Choices:
1) Copy Components 2) Derive 3) Promote 4) Make Adaptive
Correct Answer: Copy Components
Explanation: Copy Components is designed to duplicate selected assembly components and can create or reuse component �les as needed for a new assembly variant.Page 2
Question 4: A part has several Model States. A dimension should change only in the currently active state while the other states retain their existing values. Which edit scope is appropriate?
Choices:
1) Edit Factory Scope 2) Global Update Scope 3) Edit Member Scope 4) Drawing Scope
Correct Answer: Edit Member Scope
Explanation: Edit Member Scope applies supported edits to the active member rather than all Model State members, allowing the active state to carry a unique parameter or feature condition.
Question 5: A designer needs to place a standard socket-head cap screw from
Autodesk's reusable standard-parts library into an assembly. Which source is most appropriate?
Choices:
1) Design Assistant 2) Content Center 3) Presentation Environment 4) Sketch Doctor
Correct Answer: Content Center
Explanation: Content Center provides reusable standard components such as fasteners, bearings, and other catalog hardware that can be placed directly into assemblies.Page 3